Version IPMI v2.0 Number of Entries 42 Last Add Time 03/01/2010-15:35:29 Last Erase Time 03/01/2010-15:27:40 Free Space Remaining in Bytes 64692 Num Time Stamp Sensor Type, Name & Number Event Description Generator ID 1 03/01/2010-15:27:40 Event Log Cleared /System Event Log The BMC on S5000PSL has reported an informational assertion event for System Event Log. The event has the following information: the log area has been reset and/or cleared. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 2 03/01/2010-15:28:59 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is first of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 3 03/01/2010-15:28:59 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is second of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 4 03/01/2010-15:29:08 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is first of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 5 03/01/2010-15:29:08 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is second of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 6 03/01/2010-15:29:08 Power Unit /Power Unit (#0x01) The BMC on S5000PSL has reported an informational assertion event for Power Unit. The event has the following information: the power unit is powered off or being powered down. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 7 03/01/2010-15:29:39 Processor /Processor 1 Stat (#0x90) The BMC on S5000PSL has reported an informational assertion event for Processor 1 Stat. The event has the following information: the processor's presence has been detected. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 8 03/01/2010-15:29:39 Processor /Processor 2 Stat (#0x91) The BMC on S5000PSL has reported an informational assertion event for Processor 2 Stat. The event has the following information: the processor's presence has been detected. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 9 03/01/2010-15:29:31 Power Unit /Power Unit (#0x01) The BMC on S5000PSL has reported a critical assertion event for Power Unit. The event has the following information: the power unit's AC is lost. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 10 03/01/2010-15:29:41 Power Unit /Power Unit (#0x01) The BMC on S5000PSL has reported an informational deassertion event for Power Unit. The event has the following information: the power unit's AC is lost. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 11 03/01/2010-15:29:44 Physical Security (Chassis Intrusion The BMC on S5000PSL has reported a warning assertion event for Physical Scrty. The event has the following information: there has been a general chassis intrusion. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 12 03/01/2010-15:29:46 Button /Button (#0x84) The BMC on S5000PSL has reported an informational assertion event for Button. The event has the following information: the power button has been pressed. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 13 03/01/2010-15:29:49 Fan /Fan Redundancy (#0x6F) The BMC on S5000PSL has reported an informational assertion event for Fan Redundancy. The event has the following information: the sensor is in full redundancy has been regained state. No action is required. BMC - LUN #0 (Channel #00h) 14 03/01/2010-15:30:02 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is first of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 15 03/01/2010-15:30:02 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is second of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 16 03/01/2010-15:30:02 Slot/Connector /DIMM A1 (#0xE0) The BMC on S5000PSL has reported an informational assertion event for DIMM A1. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 17 03/01/2010-15:30:02 Slot/Connector /DIMM A2 (#0xE1) The BMC on S5000PSL has reported an informational assertion event for DIMM A2. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 18 03/01/2010-15:30:02 Slot/Connector /DIMM B1 (#0xE2) The BMC on S5000PSL has reported an informational assertion event for DIMM B1. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 19 03/01/2010-15:30:02 Slot/Connector /DIMM B2 (#0xE3) The BMC on S5000PSL has reported an informational assertion event for DIMM B2. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 20 03/01/2010-15:30:02 Slot/Connector /DIMM C1 (#0xE4) The BMC on S5000PSL has reported an informational assertion event for DIMM C1. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 21 03/01/2010-15:30:02 Slot/Connector /DIMM C2 (#0xE5) The BMC on S5000PSL has reported an informational assertion event for DIMM C2. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 22 03/01/2010-15:30:02 Slot/Connector /DIMM D1 (#0xE6) The BMC on S5000PSL has reported an informational assertion event for DIMM D1. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 23 03/01/2010-15:30:02 Slot/Connector /DIMM D2 (#0xE7) The BMC on S5000PSL has reported an informational assertion event for DIMM D2. The event has the following information: a slot or connector device has been installed or attached. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 24 03/01/2010-15:30:05 Fan /Fan 1 Present (#0x62) The BMC on S5000PSL has reported an informational deassertion event for Fan 1 Present. The event has the following information: the device has been removed or is absent. Please replace the device. BMC - LUN #0 (Channel #00h) 25 03/01/2010-15:30:06 Fan /Fan Redundancy (#0x6F) The BMC on S5000PSL has reported a critical deassertion event for Fan Redundancy. The event has the following information: the sensor is no longer in a full redundancy has been regained state. Please replace the device. BMC - LUN #0 (Channel #00h) 26 03/01/2010-15:30:06 Fan /Fan Redundancy (#0x6F) The BMC on S5000PSL has reported a critical assertion event for Fan Redundancy. The event has the following information: the sensor is in redundancy has been lost state. Please replace the device. BMC - LUN #0 (Channel #00h) 27 03/01/2010-15:30:06 Fan /Fan Redundancy (#0x6F) The BMC on S5000PSL has reported a warning assertion event for Fan Redundancy. The event has the following information: the sensor is in redundancy has been lost and the unit is still functioning with the minimum amount of resources needed for normal operation state. Please check the device. BMC - LUN #0 (Channel #00h) 28 03/01/2010-15:30:06 Fan /Fan 2 Present (#0x63) The BMC on S5000PSL has reported an informational deassertion event for Fan 2 Present. The event has the following information: the device has been removed or is absent. Please replace the device. BMC - LUN #0 (Channel #00h) 29 03/01/2010-15:30:06 Fan /Fan 3 Present (#0x64) The BMC on S5000PSL has reported an informational deassertion event for Fan 3 Present. The event has the following information: the device has been removed or is absent. Please replace the device. BMC - LUN #0 (Channel #00h) 30 03/01/2010-15:30:06 Fan /Fan 4 Present (#0x65) The BMC on S5000PSL has reported an informational deassertion event for Fan 4 Present. The event has the following information: the device has been removed or is absent. Please replace the device. BMC - LUN #0 (Channel #00h) 31 03/01/2010-15:30:06 Fan /Fan Redundancy (#0x6F) The BMC on S5000PSL has reported an informational deassertion event for Fan Redundancy. The event has the following information: the sensor is nolonger in redundancy has been lost and the unit is still functioning with the minimum amount of resources needed for normal operation state. No action is required. BMC - LUN #0 (Channel #00h) 32 03/01/2010-15:30:06 Fan /Fan Redundancy (#0x6F) The BMC on S5000PSL has reported a critical assertion event for Fan Redundancy. The event has the following information: the sensor is in redundancy has been lost and there are insufficient resources to maintain normal operation state. Please replace the device. BMC - LUN #0 (Channel #00h) 33 03/01/2010-15:32:44 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is first of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 34 03/01/2010-15:32:44 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is second of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 35 03/01/2010-15:32:58 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is first of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 36 03/01/2010-15:32:59 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is second of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 37 03/01/2010-15:32:59 Power Unit /Power Unit (#0x01) The BMC on S5000PSL has reported an informational assertion event for Power Unit. The event has the following information: the power unit is powered off or being powered down. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 38 03/01/2010-15:33:02 Button /Button (#0x84) The BMC on S5000PSL has reported an informational assertion event for Button. The event has the following information: the power button has been pressed. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 39 03/01/2010-15:33:02 Power Unit /Power Unit (#0x01) The BMC on S5000PSL has reported an informational deassertion event for Power Unit. The event has the following information: the power unit is powered off or being powered down. There is no recommended action defined for this event. BMC - LUN #0 (Channel #00h) 40 03/01/2010-15:33:18 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is first of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 41 03/01/2010-15:33:17 System Event #0x83 The BIOS on S5000PSL has reported an informational assertion event for System Event sensor 131. The event has the following information: Timestamp Clock Sync. Event is second of the pair. There is no recommended action defined for this event. BIOS (Channel #00h) 42 03/01/2010-15:35:29 System Event #0x01 The SMI Handler on S5000PSL has reported an informational assertion event for System Event sensor 1. The event has the following information: an OEM system boot event has occurred. There is no recommended action defined for this event. SMI Handler (Channel #00h)